Optic Fiber Cable

Notes:

• The important point in designation of the machine is its energy consumption and production rate (efficiency).
• All standards for Optic Fiber Cable must be passed by final products.
• Regarding our production target it is needed to have an efficient line with at least 250 m/min production capacity.
• The Machines must can make different product shapes regarding FTTH needs and regulations.
• Maximum length of each proposed production lines must not exceed 55 meters.

  

  • Easy and fast installation due to its small diameter and light construction.

  Suitable for pushing, blowing method.

  • Problem-free use in power lines due to its non- metallic
  • In network systems, MAN, WAN, LAN
  • As a backbone cable in FTTX
  • – Optical fiber core
  • – Waterproof thixotropic jelly
  • – PBT Tube
  • – Non-metallic central strength member (FRP)
  • – Water-swellable yarn
  • – Ripcord
  • – UV resistant polyethylene (HDPE) black outer jacket, LSZH or LSOH

    Optical Drop Cable:

    Drop Cable for FTTH network

    Applications:

    • Suitable for FTTX networks and access networks.
    • Can be used to connect subscriber units to building entry cabinets.

    Features:

    • Capable of accommodating 1 to 8 fibers.
    • Approximate dimensions of 3×2 millimeters.
    • Equipped with two non-metallic FRP elements to protect optical fibers1.
    • Direct connector installation possible.
    • Has a desirable bending radius and high tensile strength.
    • Features LSZH coating to prevent flame spread and the release of toxic gases after ignition.
    • Capability of production with PVC and polyethylene PE coatings.
    • This cable is produced in two variants: Indoor (with white or yellow coating) and Outdoor (with black coating).